Westinghouse WHI942BE handleiding
Handleiding
Je bekijkt pagina 20 van 24
20 TrOuBlESHOOTINg
TROUBLESHOOTING
PrOBlEm POSSIBlE CauSE rEmEdy
You cannot activate
or operate the hob.
The hob is not connected to an electrical
supply or it is connected incorrectly.
Check if the hob is correctly connected to
the electrical supply. Refer to the connection
diagram.
The fuse is blown. Make sure that the fuse is the cause of the
malfunction. If the fuse is blown again and
again, contact a qualified electrician.
You do not set the heat setting for 10
seconds.
Activate the hob again and set the heat
setting in less than 10 seconds.
You touched 2 or more sensor fields at the
same time.
Touch only one sensor field.
There is water or fat stains on the control
panel.
Clean the control panel.
An acoustic signal
sounds and the
hob deactivates.
An acoustic signal
sounds when the
hob is deactivated.
You put something on one or more sensor
fields.
Remove the object from the sensor fields.
The hob deactivates. You put something on the sensor field. Remove the object from the sensor field.
Residual heat
indicator does not
come on.
The zone is not hot because it has been
operated only for a short time or the sensor is
damaged.
If the zone has been operated sufficiently
long to be hot, speak to an Authorised
Service Centre.
Hob²Hood does not
work.
You covered the control panel. Remove the object from the control panel.
You use a very tall pot which blocks the
signal.
Use a smaller pot, change the cooking zone
or operate the hood manually.
Automatic Heat Up
does not operate.
The zone is hot. Let the zone become sufficiently cool.
The highest heat setting is set. The highest heat setting has the same power
as the function.
The heat setting
changes between
two levels.
Power management operates. Refer to "Operating instructions".
The sensor fields
become hot.
The cookware is too large or you put it too
near to the controls.
Put large cookware on the rear zones, if
possible.
There is no sound
when you touch the
panel sensor fields.
The sounds are deactivated. Activate the sounds. Refer to "Operating
instructions".
comes on.
Child Safety Device or Lock operates. Refer to "Operating instructions".
Bekijk gratis de handleiding van Westinghouse WHI942BE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | WHI942BE |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4442 MB |
