Westinghouse W6TCAC handleiding
Handleiding
Je bekijkt pagina 13 van 44
English
|
13
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTION
Motor does not start
The power supply is faulty Be sure that the tool is connected to a
working power supply.
The power cord or extension cord is damaged
or not plugged in properly
Inspect the power cord, extension cord,
power plug, and the power outlet. Do not use
the tool if any cord is damaged.
The motor is overloaded and the circuit
breaker trips
Wait 15 minutes and try to use the tool
again. Avoid using the tool in soil with hard
objects or when the soil is wet or frozen.
The carbon brushes are worn down Contact customer service.
Abnormal noise
The tines are worn or damaged Replace the tines.
The working depth is too shallow Operate the tool at a slower pace and deeper
with the tool.
Excessive vibration
Loose components Inspect the tool and tighten any loose
screws, nuts or components. If the noise
continues, contact customer service.
Poor performance
The tines are worn or damaged Replace the tines.
The working depth is too shallow Operate the tool at a slower pace and deeper
with the tool.
Tool overheating
The motor is overloaded and the circuit
breaker trips
Reduce the load on the motor. Avoid using
the tool in soil with hard objects or when the
soil is wet or frozen.
The extension cord is too long with an
insufficient gauge.
Use an extension cord of the appropriate
gauge and length.
Bekijk gratis de handleiding van Westinghouse W6TCAC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | W6TCAC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4657 MB |
