Westinghouse W18TCAC handleiding
Handleiding
Je bekijkt pagina 5 van 41
English
|
5
SAFETY
WARNING
READ AND UNDERSTAND ALL IN-
STRUCTIONS. Failure to follow all instructions listed below
and on the machine may result in electric shock, fire, and/or
serious personal injury.
z Read the user manual carefully. Learn its applications and lim-
itations, as well as the specific potential hazards related to this
tool. Following this rule will reduce the risk of electric shock,
fire, or serious injury.
z Do not permit children to use this tool.
z Only use accessories that are recommended by the manufacturer
for the model described in this manual. Use only as described
in this manual.
z Do not put any object into openings. Do not use with any open-
ing blocked; keep free of dust, lint, hair, and anything that may
reduce air flow.
z Keep hair, loose clothing, fingers, and all parts of body away
from openings and moving parts.
z Be sure the extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to carry the
current that the product will use. A wire gauge size (A.W.G.)
of at least 14 is recommended for an extension cord 50 feet
or less in length. If in doubt, use the next heavier gauge. The
smaller the gauge number, the heavier the cord. An undersized
cord will cause a drop in line voltage resulting in loss of power
and overheating.
z WARNING: Use outdoor extension cords marked SW-A, SOW-A,
STW-A, STOW-A, SJW-A, SJTW-A, or SJTOW-A. These cords
are rated for outdoor use and reduce the risk of electric shock.
z This product is designed with a cord retainer that prevents the
extension cord from being pulled loose while using.
z If cord is damaged in any manner while plugged in, pull extension
cord from wall receptacle.
z Never carry the tool by the cord or yank it to disconnect from a
receptacle. Keep the cord from heat, oil, and sharp edges.
z Keep hands away from moving parts.
z Avoid Unintentional Starting – Do not carry plugged in appliances
with a finger on the switch trigger. Be sure the switch trigger is
not engaged before plugging in.
z Do not use the tool if the switch trigger does not turn it on or
off. Any tool that cannot be controlled with the switch trigger is
dangerous and must be repaired.
z Do not operate this tool in the presence of flammable liquids,
gases, or dust.
z Keep bystanders, children, and visitors at least 100 ft. away
while operating this tool.
z If the appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, call customer
service.
z Do not use this product while tired, upset, or under the influence
of drugs, alcohol, or medication. A moment of inattention while
operating this product may result in serious personal injury.
z Use safety equipment. A dust mask, non-skid safety shoes, hard
hat, or hearing protection must be used for appropriate conditions.
z Do not wear loose clothing, scarves, or jewelry. They can be
caught in moving parts.
z Inspect for misalignment or binding of moving parts, breakage
of parts, and any other condition that may affect operation. If
damaged, call customer service.
z Keep this product and the handle dry, clean and free from oil
and grease. Always use a clean cloth when cleaning. Never use
brake fluids, gasoline, petroleum-based products, or any strong
solvents to clean this tool. Following this rule will reduce the
risk of loss of control and deterioration of the enclosure plastic.
z Always wear safety glasses with side shields. Everyday glasses
have only impact resistant lenses. They are NOT safety glasses.
Following this rule will reduce the risk of eye injury.
z Always wear eye protection with side shields marked to comply
with ANSI Z87.1 along with hearing protection when operating
this equipment.
z Protect hearing – Wear hearing protection during extended
periods of operation. Following this rule will reduce the risk of
serious personal injury.
z Do not expose this tool to rain. Water will increase the risk of
electric shock.
z Wear heavy long pants, long sleeves, boots, and gloves. Avoid
loose garments or jewelry that could get caught in moving parts
of the machine or its motor.
z Wear rubber boots when operating this tool. Protective footwear
will protect feet and improve footing on slippery surfaces. Do
not operate barefoot or while wearing sandals.
z Keep firm footing and balance. Do not overreach. Overreaching
can result in loss of balance.
z Do not operate this tool in a direction that will cause debris or
dust to be thrown towards people or pets.
z Store this tool indoors — When not in use, this tool should be
stored indoors in a dry, locked up place — unplugged and out
of the reach of children.
z When servicing this tool, use only identical replacement parts.
Replace or repair damaged cords. Follow all instructions in the
Maintenance section of this manual. Use of unauthorized parts
or failure to follow Maintenance Instructions may create a risk
of shock or injury.
z Never use this tool near fires, fireplaces, or hot ashes. Use near
fires or ashes can spread fires and result in serious injury and/
or property damage.
z Inspect the work area before each use. Remove all objects such
as rocks, broken glass, nails, wire, or string that can be thrown
or become entangled in the machine.
z Do not use this tool on ice. This can cause the operator to slip
and fall, resulting in possible serious personal injury.
z Never use this tool on frozen lakes, rivers, or similar surfaces.
Serious injury or death could occur if the ice breaks.
z Never use this tool on a rooftop or other unstable surface. This
can result in death or serious personal injury.
z For household use only.
Bekijk gratis de handleiding van Westinghouse W18TCAC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | W18TCAC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4113 MB |
