Wesco 272974 handleiding
Handleiding
Je bekijkt pagina 2 van 7
Page2of7
Folding Handle Scissor Lift Tables
(Part # 272974)
Instruction Manual
ATTENTION: TO INSURE SAFE AND EASY USE OF YOUR WESCO SCISSOR LIFT
TABLE, READ THESE INSTRUCTIONS ENTIRELY BEFORE USING.
1. GENERAL INFORMATION
1.1 DESCRIPTION
Thank you for purchasing a Wesco Folding Handle Scissor Lift Table. This table is made of
high quality steel and is designed for horizontal lifting and transportation of loads on a level, fixed base.
For safe operation of this unit, please carefully read these instructions before use and keep it on file for
reference.
1.2 SPECIFICATIONS
Part Number 272974
Model Number LT-660FHSL
Capacity 660 lbs
Table Size 19.5” x 32”
Table Thickness .1”
Raised Height 35”
Lowered Height 14”
Caster Size 5” x 1.5”
Locking Caster (LC) Yes
Weight 170 lbs
Materials and specifications are subject to change without notice.
2. SAFETY INFORMATION
1) Read these instructions carefully before operation and get to know the performance and operation
requirements of the lift table.
2) Do not overload the hydraulic lift table. Overloading will cause damage to the hydraulic lift table.
3) It is forbidden for operators to stand or sit on the table during operation.
4) Do not insert hands or feet under the lowering table.
5) Brake the table when loading goods to prevent it from moving.
6) Off-set loading is forbidden when loading goods, goods should be distributed uniformly over the
table.
7) Loose or unstable goods are not permitted to be loaded.
8) The table can’t be moved when goods are being lifted.
9) The table can only be moved on flat and hard ground, do not use on sloped or rugged ground;
10) When putting goods on the table which has been hoisted, the weight of goods should be within rated
load.
Note: The safety valve only works in the hoisting process, if the table has been hoisted, and then has
overweight load on it, the safety valve will not work (also possibly damaging the unit).
11) When loading and unloading goods on hoisted table, don’t drag goods in cross direction, which may
cause serious off-set loading and make the table turn over.
12) When maintaining and repairing the table, the stand bar should be used to support fork arm in order
to prevent table from falling (there should be no load on the table).
Bekijk gratis de handleiding van Wesco 272974, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wesco |
| Model | 272974 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1495 MB |
