Wesco 272936 handleiding
Handleiding
Je bekijkt pagina 11 van 18
159272A Page 11 of 18
© Copyright 2018 WESCO Industrial Products, LLC. Specifications subject to change. Not responsible for errors or omissions.
Scale Pallet Truck
(Part # 272936 & 272938)
Instruction Manual
ATTENTION: TO INSURE SAFE AND EASY USE OF YOUR WESCO PALLET
TRUCK, READ THESE INSTRUCTIONS ENTIRELY BEFORE USING.
7. TROUBLE SHOOTING
No
Problem Causes Solutions
1
Forks cannot lift to
maximum height
- There is not enough hydraulic oil.
- Pour in hydraulic oil.
2
Forks cannot lift up
- No hydraulic oil.
- The oil has impurities.
- The Adjusting Nut (104) is too high,
keeping the pumping valve open.
- Air enters the hydraulic system.
- Refill the hydraulic oil.
- Change the oil.
- Adjust the nut (104) or screw (318)
(see item 4.4)
- Remove the air.(see item 5.2)
3
Forks cannot be
lowered
- The Piston Rod (328) or Pump Body
(322) is deformed resulting from partial
loading slanting to one side or over-
loading.
- The fork was kept in a high position for
an extended amount of time. The piston
rod bore to arise in rusting and jamming
of the rod.
- The Adjusting Nut (104) or Screw (318)
is not in correct position.
- Replace the Piston Rod (328) or
Pump Body (322).
- Keep the fork in the lowest position if
not using, and pay more attention to
lubricate the rod.
- Adjust the Nut (104) or Screw (318)
(see item 4.3)
4
Leaks
- Sealing parts worn or damaged.
- Some part cracked or worn down.
- Replace with the new parts.
- Replace with the new part.
5
Forks lowers
without the release
valve working
- Impurities in the oil prevent the release
valve from closing.
- Some part/s of hydraulic system are
cracked or bored.
- Air enters the hydraulic system.
- Sealing parts worn or damaged.
- The Adjusting Nut (104) or Screw (318)
is not in the correct position.
- Replace with new oil.
- Inspect and replace the damaged
part/s.
- Remove the air. (See item 5.2)
- Replace with the new parts.
- Adjust the nut (104) or screw (318).
See item 4.2)
6
The scale’s result is
incorrect
- The bolts (224) scrape the platform
(223)
- The platform scrapes the fork (218)
- Adjust the bolts (224)
- Face lifting the platform
7
Nothing is displayed
by the terminal
- The battery power is too low - Replace the battery
8
Error code appears:
E1, E2, E3...
- See “METTLER TOLEDO HAWK Terminal Technical Manual” for IND221 or
IND231 Weighing Terminal (Model labeled on display unit)
NOTE: DO NOT ATTEMPT TO REPAIR THE PALLET TRUCK UNLESS YOU ARE TRAINED AND
AUTHORIZED TO DO SO.
Bekijk gratis de handleiding van Wesco 272936, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wesco |
| Model | 272936 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5980 MB |
