Wesco 272742 handleiding
Handleiding
Je bekijkt pagina 3 van 9
Page3of9
©Copyright2020WESCOIndustrialProducts,LLC.Specificationssubjecttochange.Notresponsibleforerrorsoromissions.
Standard Deluxe Pallet Truck
(Part # 272136, 272142, 272148, 272736, 272742, 272748)
Instruction Manual
ATTENTION: TO INSURE SAFE AND EASY USE OF YOUR WESCO PALLET
TRUCK, READ THESE INSTRUCTIONS ENTIRELY BEFORE USING.
1.2 SPECIFICATIONS (CONTINUED)
Figure 1
2. HANDLE ASSEMBLY
Items identified in Parts Diagrams
1) Use schematics and Figure 1 as a reference.
2) Position yourself behind the truck with forks pointing away.
3) Remove (3) screws [Item 22] from handle base [item 23].
4) Holding handle [item 68] in one hand, and a screwdriver in the other, place the screwdriver in one
of the 3 screw holes in handle base [item 23]. Pull on the screw driver so that the handle base [item
23] tilts back until the center hole in the handle [item 23] and axle [item 21] are aligned.
5) Slip chain [item 72] through both holes.
6) Replace 3 each screws [item 22] attaching handle [item 68] to handle base [item 23].
7) Pull up on lowering arm [item 35] and slip chain and nut assembly [items 72, 73] into slot. Nut [item
73] should be resting against underside of lowering arm [item 35].
Bekijk gratis de handleiding van Wesco 272742, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wesco |
| Model | 272742 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2957 MB |
