Wesco 272468 handleiding
Handleiding
Je bekijkt pagina 3 van 15
Page3of15
©Copyright2018WESCOIndustrialProducts,LLC.Specificationssubjecttochange.Notresponsibleforerrorsoromissions
Electric Office Lift
(Part # 272468)
Instruction Manual
ATTENTION: TO INSURE SAFE AND EASY USE OF YOUR WESCO LIFTER, READ
THESE INSTRUCTIONS ENTIRELY BEFORE USING.
2. PRE-OPERATION ASSEMBLY
Items Numbers reference Drawings/List on Pages 7-8
1) Check the parts are complete, in good condition and appearance.
2) Connect the fixed fork (30a) by bolt (32) to the safety belt (29), downward/upward bearing seat (41)
separately, without loosening and ensure the safety belt is clamped firmly.
3) Switch the power ON without load, (Buzzer may beep, switch off/on again, beep will stop.); operate the
hand panel (19), platform (30) lifts smoothly up to the max. height, keep it still, and then lower it to the
bottom position.
4) Repeat step 3 with a rated load, the platform should lift smoothly to the max. height, stop without
slipping, and lower smoothly to the bottom position.
5) The maintenance-free battery, which is provided with the lifter, has been initially charged full. However
the battery may require some recharging before use.
3. SAFETY INFORMATION (WARNINGS)
1) Use only on smooth surfaces.
2) Do not overload, make sure load is distributed uniformity.
3) Buzzer will beep to alert of a low battery, charge as soon as possible or the battery can be damaged.
4) Ensure that the input voltage of the charger complies with local power net voltage.
5) Do not put hands/feet in contact of chain or other moving parts.
6) Do not to carry out long hours of continuous work under extreme loads, this can lead to overheating of
the motor and panel.
7) The working life of the lift can be greatly prolonged by operating it under 0.7 times the maximum
nominal load.
8) Keep the electric control commission box closed before operation.
4. MAINTENANCE
Daily
Check the smoothness and stability of the platform functions, raising and lowering.
Monthly
1) Check for any deformation, connection loosening, wearing and abnormal sounds from:
- Connecting bolts - Wheels
- Rolling bearings - Transmission chain
- Pole - Safety belt
- Structure parts - Moving parts.
2) Check the jiggling, wearing, lubricating, and loosening of:
- Chain - Sprocket wheel
- Chain-trolley - Connecting bolts
- Inner transmission box.
3) Adequately grease parts in need.
Every 3 Months
Check the control panel, charger, battery and electric control wiring if any loosening inner transmission
box and the inner box cleaning.
Bekijk gratis de handleiding van Wesco 272468, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wesco |
| Model | 272468 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4020 MB |
