WesAudio _Rhea handleiding
Handleiding
Je bekijkt pagina 25 van 37
WESAUDIO
8/13/24
_RHEA USER MANUAL V2
25
For detailed explanations of each control and its functionality, users are encouraged to consult the chapter
titled "Front Panel Functions." This section provides comprehensive insights into how to interact with the
_RHEA, whether you're adjusting parameters on the physical unit or via the plug-in.
1. Undo: The Undo feature in the _RHEA plug-in allows users to revert to the previous state before the
most recent adjustment was made. This function is essential for quickly correcting mistakes or
reassessing changes without permanent consequences to the settings.
2. Redo: Following an Undo action, the Redo function permits users to reapply the last change that was
undone. This feature ensures that no adjustment is final until the user is satisfied, providing an
additional layer of flexibility in tweaking the settings.
3. Previous Preset: Loads the previous preset from preset database.
4. Next Preset: Loads the next preset from preset database.
5. Preset Name: The name of the preset currently in use or being modified, which allows for easy recall
or sharing of specific configurations.
6. Preset Selector: Allows for the selection, viewing, and deletion of presets.
7. Preset Info: Displays details of the currently loaded preset.
8. Preset Save: Saves currently selected presets.
9. Preset Save As: Facilitates saving current settings as a preset providing name and preset details.
10. Menu:
• Resize: Adjusts the GUI size (75%/100%/125%/150%/175%/200%), catering to different
screen sizes and user preferences.
• Reset Parameters to Default: Resets all plugin parameters to their default states.
• Shows currently installed plug-in version.
11. Meter: Displays the real-time level of the processed signal, providing visual feedback on the signal's
amplitude.
12. Gain Reduction Meter: Shows the amount of gain reduction being applied to the signal, which is
helpful for monitoring compression or limiting.
13. Input: Controls the input signal level before processing, allowing for adjustment to optimize signal
strength before any dynamic effects are applied.
14. Threshold: Sets the level at which the compression or limiting effect kicks in, allowing fine control over
dynamic range management.
15. Output: Adjusts the final signal level after all processing, ensuring the overall level is appropriate when
reintroduced into the signal chain.
16. Attack: Defines how quickly the compressor or limiter responds to signals exceeding the threshold,
affecting how tightly the effect grabs transients.
17. Mix: Balances between the wet (processed) and dry (unprocessed) signal, allowing for parallel
compression or blending effects.
18. Release: Controls how fast the processor releases gain reduction once the input signal falls below the
threshold, affecting the smoothness or punchiness of the compression.
19. Bypass: Allows to engage/disable bypass on the hardware unit.
20. THD: Toggles harmonic distortion levels OFF/MED/HIGH.
21. Mode Selector: Turn on or off Saturation.
22. SC Filter: Enables a filter on the sidechain input, allowing certain frequencies to be excluded from
triggering the compression. Switches between OFF/60/90/150Hz.
23. Toggle Connection Button: This button toggles the connection status ON/OFF. It functions only when
a connection ID has been selected using the "Select Connection Button.”
Bekijk gratis de handleiding van WesAudio _Rhea, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | WesAudio |
| Model | _Rhea |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9918 MB |
