WesAudio _PHOEBE handleiding
Handleiding
Je bekijkt pagina 32 van 40
WESAUDIO
9/14/22
_PHOEBE USER MANUAL
32
6.10. Memories
Parameter storage could be summarized like this:
- _PHOEBE unit has TWO separate fast presets which can be triggered via Front/Rear button.
- _PHOEBE plugin can store up to 40 number of configurations via Config Banks available from
the plug-in.
6.10.1. Synchronization upon connection
When new plugin instance is loaded into DAW, its state is unmodified, that means that no
parameters are yet modified. When user will initiate connection to hardware unit by setting Connection
ID, Plugin will download current state of parameters from the unit including any available fast
configuration presets (e.g., A/B). For instance, if connection between _PHOEBE plugin and _PHOEBE
hardware will be triggered, and plugin will be in unmodified state, all parameter states will be
downloaded to the plugin, including A and B presets states.
6.11. Automation
WesAudio devices are capable to follow any automation triggered from your DAW. Our devices
were tested against high performance peaks.
NOTE: Please note that most of the settings which are adjustable on this preamplifier will cause artifacts in
the source signal – this will happen as most of the settings are managed via internal switching or relays,
which always cause glitches upon change. Also, preamplifier is very sensitive to any noises, and due to its
amplification nature, it will exaggerate any form of artifact which goes through the circuit. However,
automation can be used between songs, or song sections, or simply very small changes to gain will still work
perfectly fine!
6.11.1. Automation record
Besides normal automation features all knobs are touch sensitive, and this brings possibility to
record automation using Hardware unit itself. Just enable automation record in your DAW and start
moving HW knobs!
6.12. Pro Tools Integration
Starting from software release 2.1 WesAudio plugins integrates with Pro Tools using all powerful
features:
• Making plugin instance “inactive” will force the plugin to unload, and because of that it will also
disconnect from the hardware. It means that new plugin instance can be used to connect to the
same hardware unit where all previous settings are stored through inactivated plugin – very
useful to work with one unit on multiple sources keeping all the settings recallable with one
mouse click,
Bekijk gratis de handleiding van WesAudio _PHOEBE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | WesAudio |
| Model | _PHOEBE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8819 MB |
