WesAudio _Pandora handleiding
Handleiding
Je bekijkt pagina 14 van 36
WESAUDIO
10/29/24
_PANDORA USER MANUAL REV1
14
LOW, MID, and HIGH Band (points 1-7 apply to each band):
1. Gain Reduction (GR) Meter: Displays the amount of gain reduction applied to each band, giving visual
feedback on the compressor’s performance.
2. Threshold: Sets the compression start point, adjustable from -20 to +20dB. Any signal above this
threshold will be compressed based on the chosen ratio. Setting the Threshold to +20dB will
effectively disable compression entirely. Additionally, pushing the Threshold knob toggles the bypass
on or off.
3. Ratio: Determines the strength of the compression applied when the signal exceeds the threshold,
adjusting the compression amount.
4. Output: Adjusts the output level of the signal, with a range from -10 to +20dB, compensating for the
gain reduction caused by compression. Pushing the Output knob toggles the solo mode on or off for the
selected band. Pressing and holding the knob for one second will activate SOLO mode in a momentary
way—solo will automatically disable when the knob is released.
5. THD (Total Harmonic Distortion): Controls the harmonic distortion applied to the compressed
(wet) signal, offering two modes: MED (1% THD) and HIGH (2.5% THD).
6. Attack: Sets how quickly the compressor responds to incoming signals, with six selectable attack
times: 0.1, 0.3, 1, 3, 10, and 30 milliseconds.
7. Release: The release time can be switched between 0.1, 0.3, 0.6, 0.9, 1.2 seconds or an Auto
setting.
X-Over Frequency and SC Filter Section (LOW and HIGH band):
8. LOW SC Filter: Selects from three sidechain high-pass filter frequencies: 60Hz, 90Hz, and 150Hz,
reducing the compressor’s sensitivity to low-frequency content for the LOW band.
9. LOW X-Over Frequency: Sets the crossover frequency between the Low and Mid bands, with a range
from 40Hz to 2kHz, defining the boundary between the two bands.
10. HIGH X-Over Frequency: Sets the crossover point between the Mid and High bands, adjustable from
2kHz to 15kHz, controlling the transition between the bands.
11. HIGH SC Filter: Selects one of three sidechain low-pass filter frequencies—3kHz, 6kHz, or
9kHz—reducing the compressor’s sensitivity to high-frequency content.
Global settings:
12. MIX: Blends the wet (compressed) and dry (uncompressed) signals, enabling parallel
compression.
13. Output: Controls the level of the signal leaving the compressor, used to compensate for any gain
reduction caused by compression (-15/+15dB).
14. A/B: Two memory slots for storing and comparing different compressor settings.
15. Bypass: Bypass switch.
16. USB socket: Module control USB port.
Bekijk gratis de handleiding van WesAudio _Pandora, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | WesAudio |
| Model | _Pandora |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9409 MB |
