WesAudio ngTubeComp handleiding
Handleiding
Je bekijkt pagina 34 van 66
WESAUDIO
4/8/25
NGTUBECOMP USER MANUAL V2
34
3.4 IRON PAD Mix Compensation
The ngTubeComp includes an IRON PAD attenuation stage at the very end of the signal path, after the
signal has been fully processed and balanced. As this attenuation occurs after the MIX circuit, it is not affected
by the MIX knob in its default configuration.
Why This Matters:
When using ngTubeComp in parallel compression workflows, the MIX control adjusts the balance
between the compressed signal and the dry path. However, since the IRON PAD is outside of this path, it
continues to attenuate the full processed signal—regardless of the MIX setting.
For example, if you're compressing a signal, raising the output to match the loss from compression, and then
attenuating the result using IRON PAD by -8 dB, the overall signal may appear unity gain when toggling bypass.
But once you dial the MIX to 50%, only half the output is reaching the listener—so the perceived level drops by
~4 dB, as IRON PAD remains fixed at -8 dB.
3.4.1 Using IRON PAD Mix Compensation
!
The GConManager CONFIG app offers an IRON PAD Mix Compensation option to ensure consistent
output levels when using the MIX control.
When enabled:
• The IRON PAD attenuation dynamically follows the MIX value.
• For example, if IRON PAD is set to -8 dB and MIX is at 50%, IRON PAD will be automatically set to -4
dB.
• This ensures consistent perceived level when adjusting the MIX control, making parallel processing
more intuitive and gain-consistent.
Important Notes:
• Automation Warning:
If the MIX knob is automated while IRON PAD Mix Compensation is active, relay switching may
introduce clicks or minor audio artifacts. For automated workflows, it is recommended
to disable this feature.
• Clicking Behavior:
Changing the MIX knob while IRON PAD Mix Compensation is active may result in audible relay clicks,
which are normal but may be confusing.
• IRON PAD Step Resolution:
When the MIX is set to lower values (e.g., 50%), not all IRON PAD steps will be reachable. This is due
to the proportional scaling of the attenuation range.
Bekijk gratis de handleiding van WesAudio ngTubeComp, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | WesAudio |
| Model | ngTubeComp |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17543 MB |
