Wells MDW200 handleiding
Handleiding
Je bekijkt pagina 11 van 28
2M-Z21001 Rev- Owner's Manual for IRCS4 Impingement/Radiant Split-Belt Conveyor Toaster
7
2M-Z21876 Rev- Owner’s Manual for MDW Modular Dry Well
CLEANING
BEFORE CLEANING, TURN THE CONTROL KNOB TO THE “OFF” POSITION
AND ALLOW THE WARMER TO COOL COMPLETELY BEFORE PROCEEDING.
At each cleaning, inspect warmer flange-to-counter seal and inspect the
warmer body for damage. If damage to the body exists, contact an authorized
service agency before continuing use.
SUGGESTED CLEANING SUPPLIES
i. Mild dish detergent and water
ii. Surface sanitizer
iii. Non-scratch scour pad [Scotch-Brite™ pad number 7445 recommended]
iv. Clean cloth rag and/or sponge
DAILY CLEANING PROCEDURE
i. Once the unit has completely cooled, remove any insets or pans to be washed
s
eparately. Remove the fan/element guard to be washed separately as well.
ii. Use the non-scratch scouring pad to remove any deposits or food particles from
the body of the unit. Gently, use the same type of pad on the element, making sure
no cleaner or water is used on the element itself.
iii. Wipe the body [excluding the element] down with a clean cloth or sponge and
a mix of mild detergent and water. Rinse the cloth/sponge and then wipe down
with clean water. Do not allow any excess liquid in the unit, just enough to moisten
the sponge or cloth sufficiently for cleaning purposes.
iv. Allow to dry and wipe with surface sanitizer. At this point, reinstall the clean fan/
element guard and, when ready, any insets or pans that are to be used.
Bekijk gratis de handleiding van Wells MDW200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wells |
| Model | MDW200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3861 MB |
