Weller Laser Line 400V handleiding
Handleiding
Je bekijkt pagina 24 van 204
22
GB
Message/symptom Possible cause Remedial measures
Extraction power missing Pipe system leaking Reseal the pipe system
Filter is dirty change the filter
Turbine speed too low Increase the speed setting
Loud extraction noises Air speed through extraction-
arm is too high speed
Reduce the air speed (reduce
air quanitity)
Unit is not running Thermally switched off Leave the unit to cool down.
Switch on again after approx.
3 hours.
Filter display is not working Minimum pressure hose was
not replaced after the filter
change
Reconnect the hose to the
filter
Sub-micron paricle becoming
dirty to quickly
Pre-filter has not been used Use prefilter
Unable to detect USB medium USB medium inserted too long Do not leave USB medium
inserted for longer than 2
minutes. Remove USB
medium and switch unit off
and on again
Reset unit Wrong USB medium > 100
mA
Remove USB medium!
Original declaration of conformity
Extraction unit Laser Line 200V
Laser Line 400V
We hereby declare that the products described herein comply with the following guidelines:
2011/65/EU (RoHS), 2014/30/EU, 2006/42/EG
Applied harmonised standards:
EN 55 014-1: 2012-05 EN 60 335-1: 2012-10
EN 55 014-2: 2009-06 EN 60 335-2-45: 2012-08
EN 61 000-3-2: 2010-03/2011-06 EN 62233: 2008-11/2009-04
EN 61 000-3-3: 2014-03 EN 50 581: 2013-02
Besigheim, 2016-02-17
T. Fischer B.Frühwald
Technical director Managing director
Authorised to compile technical documentation.
Weller Tools GmbH
Carl-Benz-Straße 2, 74354 Besigheim, Germany
Error messages and error clearance
16-02-17_LaserLine_2-2.indd 22 17.02.16 13:49
Bekijk gratis de handleiding van Weller Laser Line 400V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Weller |
| Model | Laser Line 400V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 26404 MB |
