Waves Scheps Omni Channel 2 handleiding
Handleiding
Je bekijkt pagina 33 van 42
User Guide /
2
Scheps Omni Channel
33
DS
2
Module
The DS
2
module works much like a de-esser: when sound at a specified frequency surpasses a threshold, gain is
reduced by a defined amount. DS
2
differs from a de-esser in that any frequency can serve as the sidechain that
triggers the compressor. It can, of course, be used as a standard de-esser. There are two identical DS
2
sections, so
that low-frequency and high-frequency sounds can be addressed simultaneously.
Filter type select
Selects shape of filter for sidechain detection.
Range: low shelf, bell, narrow cut, high shelf
Frequency
Sets the roll-off start point for a high-pass filter or the center frequency for the band-pass filter.
Range: 20 Hz to 20 kHz
Threshold
Sets the processor’s engagement level.
The processor’s threshold uses adaptive sensing to provide more natural results.
Range: -48 dB to 0 dB
Sidechain listen
Click to audition the sidechain filter.
Range: off or on
Hold Ctrl while moving the Frequency control vertically to audition the sidechain and sweep through
frequencies. This helps locate accurate frequency settings.
DS
2
module output level adjust
Range -12 dB to +12 dB
Gain reduction meter
Indicates gain reduction imposed by the compressor.
Range: -12 dB to -3 dB (four steps)
Sidechain control access
Click on the SC button to access the DS
2
Expanded view for sidechain control.
Bekijk gratis de handleiding van Waves Scheps Omni Channel 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Waves |
| Model | Scheps Omni Channel 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11087 MB |
