Waves Curves Equator handleiding
Handleiding
Je bekijkt pagina 18 van 24
Curves Equator / User Guide
18
Cut (mix) Per Band
Use the horizontal Band Cut line between two
crossovers to adjust the amount of reduction in that
frequency range.
Band Cuts work in tandem with the Main knob; you can add up to 200% reduction per band. So, if a band’s Cut line is
set to 0%, there will be no reduction in that band, regardless of the Main knob setting. If, however, there is
reduction in a specific band, then taking the Cut line all the way down to 200% provides double the reduction of
the Main knob.
This means you can set the Main knob to a relatively high amount of reduction, to cover the worst of the problems.
Then, select frequency ranges that you want to protect—frequency ranges that need less processing.
Range: 0% to +200%; Default: 100%
Adjusting Reduction by Band vs. Editing the Threshold Curve
It is important to realize the difference between using nodes to edit the curve and adjusting reduction power in
specific frequency bands.
• Edit the threshold using Nodes, Shape, or Tilt to change the shape of the curve, so it influences what will
and what will not be processed.
• Use the Band Cut lines to adjust the reduction power by frequency to set how much reduction will occur in a
frequency range.
Bekijk gratis de handleiding van Waves Curves Equator, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Waves |
| Model | Curves Equator |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3197 MB |
