Waves Curves Equator handleiding
Handleiding
Je bekijkt pagina 14 van 24
Curves Equator / User Guide
14
Main Plate Panel: Modify the Threshold Curve
These controls are always shown.
The main control area is used to tailor the threshold curve. Controls include Threshold, Delta, Tilt, and Shape.
These controls allow you to fully control the intensity, balance, and spectral properties during processing.
Main Knob (Threshold)
The Main knob controls the processing threshold. It shifts the captured threshold curve or the flat threshold
curve either upward or downward, thus determining where dynamic reduction processing will begin. This action
essentially "shaves" the peaks of the FFT, resulting in reduction.
Range: -40 dB to +40 dB; Default 10 dB
DELTA
Click the small triangle next to the Main knob to audition only the reduced signal (DIFF). This helps
you keep track of what you are reducing, and the extent of reduction applied.
Sensitivity
Sensitivity determines the knee and ratio of dynamic compression. With a hard knee, gain reduction
occurs as soon as the signal exceeds the threshold. With a softer knee, the gain reduction begins
gradually, after the signal has exceeded the threshold, thus producing a “softer” response.
Main Plate Panel before a capture
Main Plate Panel after a capture
Bekijk gratis de handleiding van Waves Curves Equator, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Waves |
| Model | Curves Equator |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3197 MB |
