Waterpik WP-490 handleiding
Handleiding
Je bekijkt pagina 6 van 51
1110
ENGLISH
1110
ENGLISH
Battery Removal
The product contains battery and/or recyclable electronic waste. In order to protect the environment, please do not dispose along with
household waste. When battery life ends, please dispose or recycle according to local administrative regulations.
Please contact local waste administrative department for any questions.
If you intend to dispose of the Nickel Metal Hydride battery on your own, please discharge battery fully before removal and follow below
steps to remove battery:
1. Power o the device, pull the reservoir release latch and take out the reservoir.
2. Remove four screws.
3. Remove back handle .
4. Remove two screws.
5. Remove tip rotator by prying it o with a at blade screwdriver.
6. Remove chassis from Unit.
7. Flip chassis over to expose battery. Remove two screws.
8. Cut these two wires and pry battery out of chassis.
The removed battery should be disposed safely by special recycling center.
WARNING: The battery of this product is not replaceable. Please do not disassemble the product
unless you want to dispose it. Otherwise the warranty service will be void.
BATTERY REMOVAL
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
5.
6.
7.
8.
cut
Bekijk gratis de handleiding van Waterpik WP-490, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Waterpik |
| Model | WP-490 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5189 MB |