Watercool MO-RA IV 400 handleiding
Handleiding
Je bekijkt pagina 14 van 32
Torx TX20
14
7. AMBIENT LED
Required tools
LET THERE BE LIGHT
First, the feet must be removed.
Then the cable of the LED strip
is fed through the hole in the
lower part of the housing from
the outside. This is then led
out at the back as shown and
connected to either the MO-RA
IV Active Control or the MO-
RA IV Passive Control. Further
information on this can be found
in the respective instructions for
these products.
Then remove the protective film
from the double-sided adhesive
tape on the back of the LED
strip and attach the LED strip to
the bottom part of the housing
as centrally as possible. Finally,
the feet are refitted.
Bekijk gratis de handleiding van Watercool MO-RA IV 400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Watercool |
| Model | MO-RA IV 400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5215 MB |
