Warmup Forte handleiding
Handleiding
Je bekijkt pagina 4 van 28
4
Please also read the full instructions that follow this section.
Installation summary
• The suboor must be clean, level,
smooth, dry, frost-free, solid,
suitably weight-bearing and
dimensionally stable.
• Lay a damp proof membrane
over the suboor to prevent
water ingress.
• Install perimeter strip around the
perimeter of the room to allow for
dierential movement between
nished oor level and walls.
• Lay insulation board over the
membrane. Insulation should be
chosen and installed in line with
building regulations.
• Lay a vapour control layer over
the insulation to prevent water
ingress.
• Following the structural engineers
design, install the reinforcement
mesh taking care not damage the
damp proof membrane.
• Install the pipe in line with the projects working drawings. It is
recommended the pipe is installed using a spiral pattern to achieve an
even surface temperature and a high heat output.
• Install the pipe at the necessary spacing for the heat output required.
Secure the pipe to the reinforcement mesh with cable ties at
approximately 500 mm intervals.
1 2
3 4
5
SR2
2 m < 5 mm
Bekijk gratis de handleiding van Warmup Forte, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | Forte |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7895 MB |
