Warmup Forte handleiding
Handleiding
Je bekijkt pagina 15 van 28
15
Step 3 - Lay the pipe
• Install the sensor, at least 300 mm into the heated area it will be
controlling. It should be located centrally between the closest parallel
runs of pipe and not in an area inuenced by other heat sources.
• The sensor can be secured to the reinforcement mesh with cable ties
as shown�
DO NOT tape over the sensor tip it must be in full contact
with the screed layer.
• Measure and cut the pipe so that it reaches both the ow and return
ports on the manifold.
• Refer to the manifold manual for detailed information on mounting,
pressure testing and commissioning.
6
7
Bekijk gratis de handleiding van Warmup Forte, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | Forte |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7895 MB |
