Warm Audio WA76-A handleiding

73 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 6 van 73
5
9. Meter Setting
The function of the four buttons (from top to bottom) are as follows: GR - displays gain reduction amount on the meter.
+8 - 0VU corresponds to +8dBu of output level. +4 - 0VU corresponds to +4dBu of output level. Engaging the OFF
button powers off the entire unit, preventing audio signal from passing through the WA76-A / WA76-A2.
10. Dry/Wet Mix
This control determines what percentage of the signal exiting the compressor is compressed/effected and what per-
centage is dry/unaffected. When set to 100% counterclockwise, the signal is 100% “wet” and is completely com-
pressed. At 100% clockwise, the compressor is 100% “dry” and acts as an active bypass without the signal going
through the compressor’s preamp stage. The setting can also be turned off to match the exact behavior of a vintage
76-style compressor.
11. Sidechain High Pass Filter
A selectable sidechain high pass filter from 30Hz - 300Hz allows the user to prevent frequencies below the set filter
threshold from activating the compressor. While the entire frequency range remains audible and influenced by the com-
pressor, this technique helps avoid uneven dynamics and excessive low-end compression if that’s not the desired effect.
12. Stereo Link
Engages both stereo linking inputs on the back panel.
13. External Sidechain
Engages sidechain send and return connections on the back panel.
14. VU-Meter Trim
When the meter is in gain reduction mode (GR), adjust this knob to set the needle’s resting position at 0dB to calibrate
for accurate gain reduction measurement.

Bekijk gratis de handleiding van Warm Audio WA76-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkWarm Audio
ModelWA76-A
CategorieNiet gecategoriseerd
TaalNederlands
Grootte9519 MB