Wagner SprayPack 18V handleiding
Handleiding
Je bekijkt pagina 42 van 88
42
SprayPack 18V
EN
Accessories
1) Spray width at about 30 cm to the object and 100 bar (10 MPa) pressure with synthetic-resin paint 20 DIN seconds.
FINEFINISH TIPS
Top-quality painting nozzles with optimised properties for particularly high-quality surfaces even in low-pressure areas.
i
All of the tips in the table below are supplied together with the appropriate gun lter.
Application Tip marking Spray
angle
Bore
inch / mm
Spraying width mm
1)
Gun lter Order no.
Water and solvent-based varnis-
hes, lacquer paints, oils, separa-
ting agents
208
308
408
20°
30°
40°
0.008 / 0.20
0.008 / 0.20
0.008 / 0.20
120
150
190
red
red
red
0554208
0554308
0554408
Synthetic resin-based paints, PVC
paints, 2-K lacquers
210
310
410
510
20°
30°
40°
50°
0.010 / 0.25
0.010 / 0.25
0.010 / 0.25
0.010 / 0.25
120
150
190
225
red
red
red
red
0554210
0554310
0554410
0554510
Primers, llers 212
312
412
512
20°
30°
40°
50°
0.012 / 0.30
0.012 / 0.30
0.012 / 0.30
0.012 / 0.30
120
150
190
225
red
red
red
red
0554212
0554312
0554412
0554512
Fireproo ng paints, corrosion
protection paints
214
314
414
514
20°
30°
40°
50°
0.014 / 0.36
0.014 / 0.36
0.014 / 0.36
0.014 / 0.36
120
150
190
225
red
red
red
red
0554214
0554314
0554414
0554514
HEA NOZZLES FOR LOWMIST SPRAYING AT LOW PRESSURE
HEA stands for High E ciency Airless, an innovative nozzle technology revolutionising airless spraying. HEA nozzles allow the
pressure of the spray device to be reduced right down and allow it to work in the low-pressure range (ideally at 80 - 140 bar).
The nozzles can be used with all TradeTip 3 nozzle holders and WAGNER devices.
Some paints may need to be diluted to achieve the best result possible. The experts at Wagner application technology have
therefore tested a wide range of materials for you. Their recommendations can be found in the Wagner Spray Guide at sprayguide.
wagner-group.com.
If edges are visible, slowly increase the
pressure.
Even spray pattern without spray edges.
Set the low pressure in the HEA range
and start.
HEA tip table
i
All of the tips in the table below are supplied together with the appropriate gun lter.
Application Tip marking Spray
angle
Bore
inch / mm
Spraying
width mm 1)
Gun lter Order no.
Synthetic-resin paints
PVC paints
211
311
411
20°
30°
40°
0.011 / 0.28
0.011 / 0.28
0.011 / 0.28
120
150
190
red
red
red
0554211
0554311
0554411
Paints, primers
Fillers
213
313
413
20°
30°
40°
0.013 / 0.33
0.013 / 0.33
0.013 / 0.33
120
150
190
red
red
red
0554213
0554313
0554413
Fillers
Rust protection paints
415
515
615
40°
50°
60°
0.015 / 0.38
0.015 / 0.38
0.015 / 0.38
190
225
270
yellow
yellow
yellow
0554415
0554515
0554615
Rust protection paints
Latex paints
Dispersions
417
517
617
40°
50°
60°
0.017 / 0.43
0.017 / 0.43
0.017 / 0.43
190
225
270
white
white
white
0554417
0554517
0554617
Rust protection paints
Latex paints
Dispersions
519
619
50°
60°
0.019 / 0.48
0.019 / 0.48
225
270
white
white
0554519
0554619
Flame retardant 421
521
621
40°
50°
60°
0.021 / 0.53
0.021 / 0.53
0.021 / 0.53
190
225
270
white
white
white
0554421
0554521
0554621
1) Spray width at about 30 cm to the object and 100 bar (10 MPa) pressure with synthetic-resin paint 20 DIN seconds.
i
When working with a HEA nozzle, a pressure setting of 50 - 150 bar / 5-15 MPa (area marked in green on the
pressure gauge) is recommended.
Bekijk gratis de handleiding van Wagner SprayPack 18V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wagner |
| Model | SprayPack 18V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17840 MB |
