Wagner GM 5020EAW handleiding
Handleiding
Je bekijkt pagina 89 van 136
89
OPERATING MANUAL
VERSION 02/2018 ORDER NUMBER DOC 2366717
B_04791
SW2
1Nm
X
6
7
3
X = 122 ± 0.1 mm; 4.8032 ± 0.004 inch
Valve rod unit
Set length adjusting measure X
with withdrawal nut (7) and then
fasten the threaded pin (6) using
an Allen wrench SW2.
B_04372
0.5 Nm
SW6
0.8 Nm +0.1 Nm
SW5
2
1
4
5
8
9
10
8
7
11
2
2
9
2
2
Wear gloves!
The outside thread of the packing (9) must be free
of lacquer.
Valve rod unit (8) and packing (9):
- grease,
- slide together,
- screw together (10).
Grease clamping screw (1) and mount using
assembly tool (5).
Insert spring (4).
Coat the hollow section
with a brush.
Note: avoid the pin and hexagon.
(sparingly)
Only as required (if the rod seal was removed):
Press in rod seal (11). In the process, press only
on the lowest area of the rod seal.
Bekijk gratis de handleiding van Wagner GM 5020EAW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wagner |
| Model | GM 5020EAW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17100 MB |
