Wagner GM 5020EAW handleiding
Handleiding
Je bekijkt pagina 87 van 136
87
OPERATING MANUAL
VERSION 02/2018 ORDER NUMBER DOC 2366717
10.4.3 CLEANING THE PARTS AFTER DISASSEMBLY
Please note:
All reusable parts (except for the electrical components) should be cleaned thoroughly
using a suitable cleaning agent.
The adapter, plug, inside handle and all dismantled parts must be clean and dry after
cleaning. Care should be taken that these parts remain free of solvents, grease or
sweat from the hands (salt water). Clean and mount wearing gloves.
Spare parts may have safety-relevant properties.
Only repair and replace parts that are listed in the "Spare parts" chapter and that are
assigned to the unit.
Defective parts, O-rings and seal sets must always be re-placed.
WARNING
Incompatibility of cleaning agent and working medium!
Risk of explosion and danger of poisoning by toxic gases.
Examine the compatibility of the cleaning agents and working media on the basis of
the safety data sheets.
In Chapter 14 the part numbers for gun spare parts can be found as well as for wearing parts
such as seals.
Bekijk gratis de handleiding van Wagner GM 5020EAW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wagner |
| Model | GM 5020EAW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17100 MB |
