Wagner GM 5020EAW handleiding
Handleiding
Je bekijkt pagina 78 van 136
78
OPERATING MANUAL
VERSION 02/2018 ORDER NUMBER DOC 2366717
8.2.5 REPLACING THE PRODUCT HOSE AND/OR AIR HOSE
1. Loosen and unscrew clamping screw (1).
B_03389
1
2
3
4
5
6
2. Loosen nut (2) and remove product hose from the
attachment point.
3. Push protective hose (4) back.
4. Carefully remove product hose (3) from the protective
hose (4).
5. Loosen union nut (5) at gun connection and carefully
remove air hose (6) from the protective hose (4).
8.2.6 PRODUCT HOSES, TUBES AND COUPLINGS
The service life of the complete hoses between product pressure generator and application
device is reduced due to environmental inuences even when handled correctly.
Check hoses, pipes, and couplings every day and replace if necessary.
Additionally, the operator must regularly check the complete hoses for wear and tear
as well as for damage at intervals that he/she has set. Records of these checks must
be kept.
Undamaged complete hoses are to be replaced when one of the two following
intervals has been exceeded:
− 6 years from the date of the hose crimping (see tting embossing).
− 10 years from the date of the hose imprinting.
Fitting embossing
Meaning
(if present)
xxx bar Pressure
yymm Crimping date (year/month)
XX Internal code
Hose imprinting Meaning
WAGNER Name/Manufacturer
yymm Date of manufacture (year/month)
xxx bar (xx MPa)
e.g., 270 bar (27 MPa)
Pressure
XX Internal code
DNxx (e.g., DN10) Nominal diameter
Bekijk gratis de handleiding van Wagner GM 5020EAW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wagner |
| Model | GM 5020EAW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17100 MB |
