Wagner GM 5020EAW handleiding
Handleiding
Je bekijkt pagina 39 van 136
39
OPERATING MANUAL
VERSION 02/2018 ORDER NUMBER DOC 2366717
5.7.2 MODE OF OPERATION
Recipe display
When the spray gun is connected to the control unit and the
control unit is switched on, the pre-dened recipe (R1, R2 or R3) is
shown on the gun display (2) as follows.
Recipe 1
Recipe 2
Recipe 3
Recipe change R1 R2 R3 R1
Press the operating button (4) and hold the button pressed for at
least 2 seconds to go forward 1 recipe.
R1
R3
R2
B_03182
2
4
3
Display (2) = Recipe values changed temporarily:
If the operating key (4) is pressed for 2 seconds, the saved recipe values for the previously selected recipes
numbers will be reloaded from the memory.
Status display during spraying mode
During spraying mode (trigger lever pressed), the status is shown in the display (2) by LEDs.
LED display Description
LEDs 1 - 3 light up green The spray gun is working in an optimal
high-voltage spray current range.
One or both right-hand LEDs illuminate in
orange.
Spray current too high.
Possible causes:
(Warning display: You can continue working
without any limitations.)
- Spray gun too close to the work piece
- Contamination of the spray gun
Bekijk gratis de handleiding van Wagner GM 5020EAW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wagner |
| Model | GM 5020EAW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17100 MB |
