Wachendorff WDGA 58F handleiding
Handleiding
Je bekijkt pagina 44 van 79
Technical Manual
WDGA with EtherNet/IP
5 - Webserver
© Wachendorff Automation GmbH & Co. KG
36
5.2 Information
5.2.1 Overview
Figure 5.1: Overview
In the overview you will find the following information:
• Device type: designation of the encoder
• Serial number: Device number of the encoder
• Operating time in hours: Number of hours in running operation
• Protocol: EtherNet/IP
• Device status: On or Off state
• Stack status: Connected or Offline
• Device name: WDGA-EP
• MAC device: MAC address of the encoder
• MAC port 1: MAC address of Ethernet port 1
• MAC port 2: MAC address of Ethernet port 2
• IP address: IP address of your EtherNet/IP encoder
• Netmask: Subnet mask of your EtherNet/IP encoder
• Gateway: Gateway of your EtherNet/IP encoder
The refresh rate of the web page is fixed at 10 seconds and cannot be changed. You
can tell that the data is being updated by the message: "Refreshing data", at the top
right of the field where the refresh time is displayed.
You can switch the language of the web server after the call.
After switching in a sub-mask, the web server starts again in the start mask.
Bekijk gratis de handleiding van Wachendorff WDGA 58F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wachendorff |
| Model | WDGA 58F |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11849 MB |
