Wachendorff WDGA 36C handleiding
Handleiding
Je bekijkt pagina 28 van 82
Technical Manual
WDGA with CANopen Interface
5 - General information about CAN
© Wachendorff Automation GmbH & Co. KG
17
Operational
Object
Communication enabled
SDO
yes
PDO
yes
NMT
yes
SYNC
yes
EMCY
yes
Heartbeat
yes
Device is in operational status and can send and receive PDOs.
Table 5.5: Available communication – Operational
Stopped
Object
Communication enabled
SDO
no
PDO
no
NMT
yes
SYNC
no
EMCY
no
Heartbeat
yes
The communication is almost completely disabled.
The device only reacts on NMT commands (e.g. start node).
Table 5.6: Available communication – Stopped
5.5 Heartbeat and Node-Guarding
There are two possible ways to supervise the operational availability of a CAN node
during operation.
• Heartbeat
• Node-Guarding
The heartbeat protocol is independent from the master. It is the recommended
mechanism. The device sends autonomous and cyclic a "life" message.
• Wachendorff Automation recommends the use of the
heartbeat protocol.
Bekijk gratis de handleiding van Wachendorff WDGA 36C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wachendorff |
| Model | WDGA 36C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11685 MB |
