Wachendorff SpeedMATE handleiding
Handleiding
Je bekijkt pagina 11 van 31
Technical Manual
speedMATE
2 - Safety information
© Wachendorff Automation GmbH & Co. KG
5
2 Safety information
2.1 General safety information
• When commissioning the encoder, ensure that you observe the
assembly instructions, manual and data sheet.
• Failure to observe the safety instructions may lead to
malfunctions, property damage and personal injury!
• Observe the operating instructions provided by the machine's
manufacturer.
2.2 Intended use
Encoders are components that are intended for installation in machines. Before
commissioning (operation in accordance with the intended use), it must be determined
that the machine as a whole corresponds to the EMC and Machine Directive.
An encoder is a sensor that is designed to detect angular positions and revolutions and
must only be used for this purpose! Wachendorff Automation manufactures and
distributes encoders for use in non-safety-relevant industrial applications.
The speedMATE is used for the non-contact detection of moving objects. It uses a
VCSEL class 1 laser with dot matrix detection.
Any other use or modifications to the product will invalidate any warranty claims against
Wachendorff Automation GmbH & Co. KG
• The output of the incremental signal is a relation to the speed.
The units (pulses/mm, m/min & mm) can only be used after the
sensor has been calibrated (correction factor).
• The encoder must not be operated outside the specified limit
parameters (see associated data sheet).
Bekijk gratis de handleiding van Wachendorff SpeedMATE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wachendorff |
| Model | SpeedMATE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4111 MB |
