Vulcan VPT7SL handleiding
Handleiding
Je bekijkt pagina 8 van 28
V SERIES -HEATED HOLDING CABINETS F-41140 (02-16)
7
VHFA9 & VHFA18 HOLDING INSTRUCTIONS
The Cabinet and its parts are hot. Be very careful when operating,
cleaning, or servicing the cabinet.
Always uncoil power cord and remove from cord wrap when
plugging cord in power source.
.
Once the cabinet has been connected to
the appropriate power source, the
cabinet is ready for operation.
1. Begin by turning the thermostat
dial to the number 5. This will
cause the heating element(s) to
start heating. Once the red light
is lit, the thermostat dial can be
turned to the desired setting.
2. Switch the Fan switch to On if
forced air holding is desired. The
use of the fan is optional. Use of
the fan keeps the temperature
even throughout the cabinet.
3. Wait approximately 25 minutes
for the cabinet to preheat.
4. Load Hot food pans with hot,
cooked food into cabinet.
VHFA9 & VHFA18 HOLDING SHUTDOWN
When the use of the holding cabinet is completed:
The Cabinet and its parts are HOT. Be very careful when operating,
cleaning, or servicing the cabinet.
1. Turn the thermostat to the Off
position.
2. Keep the fan switch in the On
position. This helps remove the
excess humidity from the food
product.
3. Allow cabinet to cool down
completely.
4. Unplug power cord.
5. Clean cabinet according to
instructions in this manual.
This cabinet is not intended to reheat or cook food. Food must be cooked and at
a safe serving temperature prior to being placed in the cabinet
The operator should always monitor the food product to insure that it remains at
a proper temperature
.
Bekijk gratis de handleiding van Vulcan VPT7SL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vulcan |
| Model | VPT7SL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13039 MB |
