Handleiding
Je bekijkt pagina 9 van 20
- 9 -
Re-install the Grate Castings along the front edge of the range.
MOTOR ASSEMBLY INSTALLATION INSTRUCTIONS
1. Remove the oven racks and the box containing legs, regulator and plumbing fittings. In some
instances, the legs, regulator and plumbing fittings will be shipped in separate finishing kit. Check
that all the listed components shown in figure are present.
2. Remove the packaging and motor grease guard from inside the oven and slide out the rack
guides. Tip the Motor Assembly to upright position.
3. Push the motor assembly to the rear in the oven cavity, taking care not to pinch the power cord or
the wiring conduit. Assemble the motor assembly from the inside of the oven and the blower
cover with #10-24 x ½ phillips truss head screws provided in the hardware bag.
Install Screws, #10-24 x
½ Phillips Head, in slots
on Bullnose as noted.
Note: Align the end of
the Bullnose with the
Range for fit.
Figure 2
LH Rack Guide
Motor Assembly
RH Rack
Guide
Motor Grease
Guard
Bekijk gratis de handleiding van Vulcan 72RC-6B36GN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vulcan |
| Model | 72RC-6B36GN |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4983 MB |
