Handleiding
Je bekijkt pagina 16 van 20
- 16 -
Thermostatic Griddle
Pre-heat the griddle top for approximately 15 - 20 minutes before cooking. The griddle thermostats
regulate temperatures for each 12" section of the griddle from a low setting at approximately 200°F
(93°C) to high setting at approximately 550°F (288°C).
Standard Oven Cooking
Allow time to preheat ovens before using (25 minutes to 400°F [204°C]). The oven thermostat regulates
temperature from a low setting at approximately 250°F (121°C) to high setting at approximately 500°F
(260°C). If properly used, the automatic temperature control is an efficient system. Turn thermostat
down to LOW when oven is idling, or turn the oven control to OFF when not in use.
Moderate oven temperatures will produce better food, reduce shrinkage and keep maintenance costs
down. Using a low temperature for roasting (recommended 325°F [162°C] or lower) will reduce meat
costs by reducing shrinkage.
A pan of water (approximately 12" x 20" x 1" [305 mm x 508 mm x 25.4 mm]) may be placed in the
oven bottom. This water supplies humidity to reduce shrinkage. If necessary, add water during roasting.
Convection Oven Cooking
Cooking time and temperature in convection oven may vary slightly from normal time and temperature.
LOADING AND UNLOADING THE OVEN
Open the door and load the oven as quickly as practical to conserve heat. Take care to avoid spilling
liquids while loading. Close the door and refer to recipe for cooking time.
Provide adequate space for product unloading. Rapid unloading will conserve heat and ensure proper
reheating conditions for the next load, if applicable.
CLEANING
Disconnect the electrical power to the machine and follow Lockout / Tagout
procedures.
Shut off the gas before cleaning the appliance.
The appliance and its parts are hot. Be very careful when operating, cleaning, or
servicing the appliance.
Exterior surfaces may be cleaned using soft cloth and mild detergent. Do not use Dawn® dish detergent
to clean the exterior or interior components of the range.
Do not use scouring powder. It is extremely difficult to remove completely. It can build up accumulations
that will damage the oven.
Vulcan / Wolf equipment is strongly constructed and is designed to give you long, satisfactory service at
low cost, provided you give it proper care. Frequent cleaning and occasional adjusting should reward
you with low operating and maintenance costs and faster, better service.
Bekijk gratis de handleiding van Vulcan 72CC-8B24GP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vulcan |
| Model | 72CC-8B24GP |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4983 MB |
