Handleiding
Je bekijkt pagina 7 van 20
- 7 -
Ranges mounted on casters must use a flexible connector (not included) that complies with the
Standard for Connectors for Movable Gas Appliances, ANSI Z21.69•CSA 6.16 and a quick-disconnect
device that complies with the Standard for Quick-Disconnect Devices for Use With Gas Fuel, ANSI
Z21.41•CSA 6.9. In addition, adequate means must be provided to limit movement of the appliance
without depending on the connector and the quick-disconnect device or its associated piping to limit
appliance movement. Attach the restraining device at the rear of the range.
If disconnection of the restraint is necessary, turn off the gas supply before disconnection. Reconnect
this restraint prior to turning the gas supply on and returning the range to its installation position.
If the range is installed on casters and is moved for any reason, it is recommended that the range be
re-leveled front to back and side to side for even baking.
FLUE RISER and SHELF INSTALLATION
1. Engage Tab on Channels into the slots in the back of the Chassis Top (shown).
2. Install Rear Channels and tighten mounting screws (QTY8 for 12", 24", 36", and 48" ranges,
QTY 12 for 60" ranges, and QTY 16 for 72" ranges). All mounting Screws are #10-24 x ½
unless noted otherwise.
(For units shipped with a pre-assembled backsplash assembly, skip to Step 5.)
3. Slide Back Splash down over the Rear Channels.
4. Install the Rear Heat Shield and tighten mounting screws to the Rear Channels (QTY 8 for 24,
36, 48 or QTY 12 for 60 or QTY 16 for 72) and to the Flue Exhaust (QTY 2 for a Single Oven or
QTY 4 for Double Oven).
5. Install Shelf over the top of the Back Splash; ensure the channel on the top of the Shelf
engages the top flange of the Back Splash.
6. Reinstall Rear Grates if they were removed to install Back Splash and Shelf.
DO NOT obstruct the flow of flue gases from the flue located on the rear of the range. Proper venting
of flue gas is vital to the safe and efficient operation of the range. Problems arising from the intentional
Channel to Chassis
Interface Detail
Bekijk gratis de handleiding van Vulcan 36S-36CBP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vulcan |
| Model | 36S-36CBP |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4983 MB |
