Handleiding
Je bekijkt pagina 15 van 81
11
EN
Maintenance and cleaning
MAINTENANCE AND CLEANING
CAUTION
Disconnect the appliance from the electrical
supply before ndertaking any routine
maintenance. Allow at least 5 minutes before
restarting the appliance, as frequent starting
may damage the compressor.
Do not use mechanical devices or other
means to accelerate the defrosting process,
other than those recommended by the
manufacturer.
Do not try to repair, disassemble or modify
the appliance by yourself. In case of repair
please contact our customer service.
Eliminate the dust on the back of the unit at
least once in the year to avoid hazard by fire,
as well as increased energy consumption.
Check the door gasket regularly to make
sure there are no debris. Clean the door
gasket with a soft cloth dampened with
soapy water or diluted detergent.
The interior of the product should be
cleaned regularly to avoid odor.
Use a soft cloth or sponge to clean the
inside of the product, with two tablespoons
of baking soda and a quart of warm water.
Then rinse with water and wipe clean.
After cleaning, open the door and let it dry
naturally before turning on the power.
For areas that are difficult to clean in the
product (such as narrow sandwiches, gaps
or corners), it is recommended to wipe them
regularly with a soft rag, soft brush, etc.
and when necessary, combined with some
auxiliary tools (such as thin sticks) to ensure
no contaminants or bacterials accumulation
in these areas.
Wipe the outer surface of the product with
a soft cloth dampened with soapy water,
detergent, etc., and then wipe dry.
Do not use hard brushes, clean steel
balls, wire brushes, abrasives (such as
toothpastes), organic solvents (such as
alcohol, acetone, Isoamyl acetate, etc.),
boiling water, acid or alkaline items, which
may damage the fridge surface and interior.
Boiling water and organic solvents such as
benzene may deform or damage plastic
parts.
Do not rinse directly with water or other
liquids during cleaning to avoid short circuits
or affect electrical insulation after immersion.
Defrosting
1. Power off the refrigerator.
2. Remove the food from the refrigerator
and place it properly to prevent food from
melting.
3. Clear the drain pipe (to use soft materials
to prevent damage to the liner), Prepare
the water containers for defrosting.
(pay attention to clean the compressor
compartment water draining tray,Avoding
overflow to the ground).
4. You can use the natural temperature for
the natural defrost, you can also use the
ice shovel to eliminate the frost (to use
plastic or wooden ice shovel, for avoding
damage to the liner or pipe)
5. You can also use the appropriate amount
of hot water to speed up the defrost,
with a dry towel to dry the water after
defrosting.
6. After defrosting, put back the foods in
cabinet , and power on the refrigerator.
ATTENTION
The appliance shall run continuously once it is
started. Generally, the operation of the appliance
shall not be interrupted;otherwise the service life
may be impaired
Bekijk gratis de handleiding van Vox KS0650WE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vox |
| Model | KS0650WE |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 7023 MB |
