Handleiding
Je bekijkt pagina 19 van 234
How to Use
1. Start Cooking
1. Touch the ON/OFF control. After power on,
the buzzer beeps once, all displays show “–”
or “– –”, indicating that the induction hob
has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
3. Touching the heating zone selection
control, and an indicator next to the key will
flash.
4. Select a heat setting by touching the slider
control.
• Make sure the bottom of the pan and the
surface of the cooking zone are clean and
dry.
• If you don’t choose a heat setting within 1
minute, the Induction hob will automatically
switch o. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
17
• Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the
cooking zone. Use pans whose diameter is as large as the graphic of the zone selected. Using a pot a
slightly wider energy will be used at its maximum eciency. If you use smaller pot eciency could be
less than expected. Pot less than 140 mm could be undetected by the hob. Always centre your pan on
the cooking zone.
• Always lift pans o the Induction hob – do not slide, or they may scratch the glass.
power up
power down
Bekijk gratis de handleiding van Vox EBI402F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vox |
| Model | EBI402F |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 21653 MB |
