Handleiding
Je bekijkt pagina 27 van 228
25
Problem Possible causes What to do
Make sure the ceramic hob is connected to the
power supply and that it is switched on.
Check whether there is a power outage in your
home or area. If you’ve checked everything
and the problem persists, call a qualified
technician.
No power.
The cooktop cannot
Be turned on.
Unlock the controls. See section ‘Using your
ceramic cooktop’ for instructions.
The controls are locked.
The touch controls
are unresponsive.
Make sure the touch control area is dry and
use the ball of your finger when touching the
controls.
There may be a slight film of water
over the controls or you may be
using the tip of your finger when
touching the controls.
The touch controls
are dicult to
operate.
Use cookware with flat and smooth bases. See
‘Choosing the right cookware’.
See ‘Care and cleaning’.
Rough-edged cookware.
Unsuitable, abrasive scourer or
cleaning products being used.
The glass is being
scratched.
This is normal for cookware and
does not indicate a fault.
This may be caused by the
construction of your cookware
(layers of dierent metals
vibrating dierently).
Some pans make
crackling or clicking
noises.
Operation of your appliance can lead to errors and malfunctions. The following tables contain possible
causes and notes for resolving an error message or malfunction. It is recommended to read the tables
carefully below in order to save your time and money that may cost for calling to the service center.
TROUBLESHOOTING
Failure code Problem Solution
Reinsert the connection between the display board
and the power board.
Replace the power board.
Zero error.
E0
Check the connection or replace the ceramic plate
temperature sensor.
Ceramic plate temperature sensor
failure--open circuit.
Ceramic plate temperature sensor
failure- -short circuit.
E1
E2
Ceramic plate temperature sensor
failure
E7
Failure Display, Hints and Tips
1. The hob is equipped with a self diagnostic function. With this test the technician is able to check the
function of several components without disassembling or dismounting the hob from the working
surface.
2. Failure code occur during customer using & Solution;
No Auto-Recovery
Bekijk gratis de handleiding van Vox EBC425, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vox |
| Model | EBC425 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 19863 MB |
