VOREL 80309 handleiding
Handleiding
Je bekijkt pagina 3 van 24
INSTRUKCJA ORYGINALNA
3
EN
TECHNICAL DATA
Index Load capacity [thousand. kg] Height range [mm]: Weight [kg]:
80307 2 265 - 415 2.5
80308 3 280 - 420 3.3
80309 6 382 - 600 6.2
PRODUCT DESCRIPTION
The stand is designed for works where it is required to support the large loads. It is unacceptable to transport the supported loads.
The device is designed for use only in households and cannot be used professionally, ie. in the workplace and for work to earn
money. Correct, reliable, and safe operation of the device is dependent on its proper use.
Prior to working with the device, you should read all the instructions and keep it.
For any damage or injuries caused by the tool misuse, failure to comply with safety regulations and instructions in this manual, the
supplier is not responsible. The tool misuse causes the loss of user’s rights to the guarantee and warranty.
SAFETY RECOMMENDATIONS
The stand is a device running under heavy load. When operating it you should observe basic safety rules.
Before beginning the work, read the manual and keep it around.
Never exceed the maximum load of the stand.
Do not leave an unattended lifted load. Children and people, who are untrained to operate the device, are not allowed to be
present near the stand.
Do not wear loose clothing or jewelry. Pin up long hair.
Wear the personal protection equipment.
The stand must be placed on a level, fl at, hard, and stable surface.
The stand should be inserted under a raised instrument so that the load is supported in the central portion of the saddle.
The device should be kept away from sources of heat and fi re, as this may cause damage to the device or deterioration in its
operation.
Before lifting any loads, make sure that after placing the load on the stand saddle, there is no shift of the stand.
Before placing any weight on the stand, make sure that the stand is in not damaged in any way. If your stand needs a repair, it
should be passed to an authorized repairer for this purpose.
Be prescient, do not work when you are tired or under the infl uence of drugs.
OPERATION AND MAINTENANCE
Before placing the load on the stand, make sure that the operator will have the stand and supported load in sight, while carrying
out all activities related to the operation of machine.
Insert the frame to its base. After mounting the arm on its base, you should fold the protrusion, as it is described on the housing.
Set the base so it is stable. Set the desired height, lock the frame by ratchet. Lock the arm by wedge. Put the base into space in
the place intended for lifts.
(For example, in the case of cars), so that cargo is supported centrally on the stand saddle. Slowly and carefully lower the load
on stand.
Maintenance
If the stand is not in use, store it with arm set at its lowest position. The stand must be kept clean. Do not use any modifi cation of
the structure of the stand.
Bekijk gratis de handleiding van VOREL 80309, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VOREL |
| Model | 80309 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2272 MB |
