Vonroc S7_CD511DC handleiding
Handleiding
Je bekijkt pagina 6 van 120
6
EN
WWW.VONROC.COM
• Only use extension cables that are suitable
for the power rating of the machine with a
minimum thickness of 1.5 mm
2
. If you use a ex-
tension cable reel, always fully unroll the cable.
2. MACHINE INFORMATION
Intended use
This cordless drill is intended for driving in and
loosening screws as well as for drilling in wood,
metal and plastic.
TECHNICAL SPECIFICATIONS
This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Model No.
Batteries
included
Chargers
included
Case
CD511DC
- - -
S_CD511DC
CD801AA CD802AA -
S2_CD511DC
2 x CD801AA CD802AA -
S3_CD511DC
CD803AA CD802AA -
S4_CD511DC
- - x
S5_CD511DC
CD801AA CD802AA x
S6_CD511DC
2 x CD801AA CD802AA x
S7_CD511DC
CD802AA CD802AA x
Machine information
Voltage 20V
Chuck capacity 0.8-10mm
Torque settings 17+ Drill mode
No load speed
Position 1:
Position 2:
0-450/min
0-1600/min
Weight 1.15 kg
Sound pressure level L
PA
78.3 dB(A), K=5dB(A)
Sound power level L
WA
86.3 dB(A), K=5dB(A)
Vibration ah.D
2.041 m/s
2
k=1.5m/s
2
Model No. CD801AA
Battery Type Lithium-Ion
Voltage 20V
Capacity 2.0 Ah
Recommended charger CD802AA
Weight 0.3 kg
Model No. CD802AA
Charger input 220-240V, 50Hz 0.4A
Charger output 21V
2.5A
Charging time 2Ah battery 60 minutes
Charging time 4Ah battery 120 minutes
Recommended batteries CD801AA, CD803AA
Weight 0.36 kg
Model No. CD803AA
Battery Type Lithium-Ion
Voltage 20V
Capacity 4.0 Ah
Recommended charger CD802AA
Weight 0.65 kg
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other batte -
ries could cause serious injury or damage the tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN 62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
Bekijk gratis de handleiding van Vonroc S7_CD511DC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vonroc |
| Model | S7_CD511DC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14228 MB |
