Vonroc S3_PM510DC handleiding
Handleiding
Je bekijkt pagina 8 van 136
8
EN
WWW.VONROC.COM
2. MACHINE INFORMATION
Intended use
This machine is intended for polishing and brushing
metal and coated surfaces.
The manufacturer is not liable for damages caused
by an improper use or incorrect operation of this
product.
Model No. PM510DC
Voltage 20V
No-load speed 2000-5.000/min
Disc diameter Ø 125 mm
Weight (without battery) 0.735 kg
Sound pressure level L
PA
: 77dB(A) K
PA
: 3dB(A)
Acoustic power level L
WA
: 85dB(A) K
WA
: 3dB(A)
Vibration 4.9m/s
2
K=1.5m/s
2
Temperature Max. +45 °C
Storage 0 to +45 °C
TECHNICAL SPECIFICATIONS
This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Model No.
Batteries
included
Chargers
included
Pads
PM510DC
- - -
S_ PM510DC
CD828AA CD802AA
5 Pads
(Bevelled
edge)
S2_ PM510DC
2 x CD828AA CD802AA
5 Pads
(Bevelled
edge)
S3_ PM510DC
CD829AA CD802AA
5 Pads
(Bevelled
edge)
S4_ PM510DC
2 x CD829AA CD802AA
5 Pads
(Bevelled
edge)
Model No. CD828AA
Battery Type Lithium-Ion
Voltage 20V
Capacity 2.0 Ah
Weight 0.4 kg
Model No. CD829AA
Battery type Lithium-Ion
Voltage 20V
Capacity 4.0 Ah
Weight 0.658 kg
Model No. CD830AA
Charger input
220-240V, 50-60Hz,
Max 1.5A
Charger output 21V 4.0A, 86W
Charging time with 2Ah battery 35 minutes
Charging time with 4Ah battery 60 minutes
Recommended batteries
CD801AA, CD803AA,
CD828AA, CD829AA
Weight 0.43 kg
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other
batteries could cause serious injury or damage the
tool.
CD828AA 20V, 2Ah, 2Ah Lithium-Ion
CD829AA 20V, 4Ah Lithium-Ion
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with
a standardized test given in EN 62841; it may be
used to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Bekijk gratis de handleiding van Vonroc S3_PM510DC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vonroc |
| Model | S3_PM510DC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16012 MB |
