Vonroc S_PT501XX handleiding
Handleiding
Je bekijkt pagina 16 van 104
16
EN
WWW.VONROC.COM
Make sure the roof hook-and-loop tape (4)
sticks to the frame corner hook-and-loop tape
(6)
• Then take two opposite corners and pull them
backwards to unfold the frame (2) into the
maximum extended position.
• Click all the corner locks (7) in to their locked
position.
• Then take two parallel feet, hold them to the
ground by applying a little pressure to the feet
(8). Press the frame (2) up until it clicks into the
first height position.
• Move to the other two not extended feet (8) and
repeat the previous step.
• Now make sure the tent feet poles are not bend
and assemble the feet (8) as shown in figure
J and K. Connect the buckle (9) and pull the
buckle tensioner (10) till the roof (3) moves
over the frame cross section (11). Do not over
tighten the buckle. This may damage the roof
(3) or frame (2)
Mounting the mosquito net side panels (Fig. B, P)
Only for S_PT501XX or if you bought the accessory
ART.NO PT801AA
• To install the mosquito net side panels (12) first
stick the mosquito net side panels (12) to roof
hook-and-loop tape (4).
• Make sure the zipper will be placed in the mid-
dle between 2 legs, this will be your entrance
and exit.
• Repeat this proces for the other mosquito net
side panels (12) you want to connect.
• Use the mosquito net side panel zipper (13) to
fully close of the tent.
Removing the mosquito net side panels (Fig. B, P)
Only for S_PT501XX or if you bought the accessory
ART.NO PT801AA
• Open the tent entrance by unzipping the
mosquito net side panel zipper (13) located
between the two legs.
• Carefully detach the mosquito net side panels
(12) by peeling them away from the roof hook-
and-loop tape (4). Take care not to damage the
netting or the hook-and-loop tape strips.
• Fold the mosquito net side panels (12) neatly
after removal to prevent wrinkles and make
future installation easier.
• Repeat this process for any other mosquito net
side panels (12) you wish to remove.
• Ensure all zippers and hook-and-loop tape are
closed or covered to protect them during stora-
ge.
• Store the mosquito net side panels in a dry, cool
place, preferably in the original storage bag, to
maintain their condition for future use.
Mounting the side panels (Fig. A, B, C, D, O)
Only for S2_PT501XX or if you bought the accesso-
ry ART.NO PT802AA
• To install the side panels (14) first stick the side
panels to the roof hook-and-loop tape (4).
• Make sure the corner zippers (15) are placed
against the feet (8).
• Repeat this proces for the other side panels
(14) you want to connect.
• Feel free to mount the side panels (14) in any
desired order to create your desired setup.
Removing the side panels (Fig. A, B, C , D ,O)
Only for S2_PT501XX or if you bought the accesso-
ry ART.NO PT802AA
• Unzip the corner zippers (15) that are placed
against the feet (8), carefully opening the con-
nections.
• Gently detach the side panels from the roof
hook-and-loop tape (4) by peeling them away.
Take care not to damage the hook-and-loop
tape or the fabric.
• Repeat this process for any other side panels
(14) you want to remove.
• Fold each side panel neatly after removal to
prevent wrinkles, facilitate easy setup next time
and making sure your side panels will fit inside
of the storage bag (1).
• Store the side panels in a dry, cool place, pre-
ferably in the original storage bag, to keep them
in good condition for future use.
Connecting two tents together (Fig. D)
ONLY FOR S3_PT503XX or if you bought the acces-
sory ART.NO PT807AA
• Unfold two tents as described in the first section
• Unscrew the provided tent connection spacers
(16). Put them around the feet (8) and tighten
them around two parallel feet (8).
Bekijk gratis de handleiding van Vonroc S_PT501XX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vonroc |
| Model | S_PT501XX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9879 MB |
