Vonroc CD838AA handleiding
Handleiding
Je bekijkt pagina 5 van 72
EN
5
WWW.VONROC.COM
b)
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
c) If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
SAFETY WARNINGS FOR CHARGER
Intended use
Charge only CD801AA, CD803AA, CD828AA, CD829AA
type rechargeable Battery packs with the charger.
Other types of batteries may burst causing personal
injury and damage.
a) The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction.
b) Children being supervised not to play with the
appliance.
c) Do not recharging non-rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!
ELECTRICAL SAFETY
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable
for the power rating of the machine with a
minimum thickness of 1.5 mm
2
. If you use a ex-
tension cable reel, always fully unroll the cable.
2. PRODUCT INFORMATION
Intended use
Only use the following batteries of VONROC POWER
20V battery platform. Using any other batteries could
cause serious injury or damage the charger.
CD801AA 20V, 2Ah Lithium-Ion
(5pcs 2Ah battery cells in series)
CD803AA 20V, 4Ah Lithium-Ion
(5pcs 2Ah battery cells in series, two series in
parallel)
CD828AA 20V, 2Ah Lithium-Ion
(5pcs 2Ah battery cells in series)
CD829AA 20V, 4Ah Lithium-Ion
(5pcs 2Ah battery cells in series, two series in
parallel)
The batteries of the VONROC POWER 20V battery
platform are interchangeable with all the VONROC
POWER 20V battery platform tools.
TECHNICAL SPECIFICATIONS
Model No CD831AA
Charger input
220-240V~~, 50-60Hz,
Max. 3.0A
Output 1
Output 2
21.5V
4.0A, 88W
21.5V
4.0A, 88W
Charging time 2Ah battery 35 minutes
Charging time 4Ah battery 60 minutes
Recommended batteries
CD801AA, CD803AA,
CD828AA, CD829AA
Weight 0.81 kg
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2.
1. Battery unlock button
2. Battery LED indicators button
3. Battery LED indicators
4. Battery (not included)
5. Charger
6. Charger LED indicators
3. OPERATION
Before any work on the power tool, remove
the battery.
The battery must be charged before first use.
Inserting the battery into the machine (Fig. C)
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
Bekijk gratis de handleiding van Vonroc CD838AA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vonroc |
| Model | CD838AA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8481 MB |
