Voltcraft DOV704 handleiding
Handleiding
Je bekijkt pagina 22 van 37
Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here..Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
20
5.Use the Oscilloscope
A General Knowledge Of Trigger System
As shown in Figure 5-1, there are one knob and one key. The following
exercises are to guide you through the use of the trigger system.
Figure 5-1: Trigger control area
1. Use Trigger Level knob to change the settings of the trigger level.
Rotary the Trigger Level knob, the trigger pointer on the screen moves up
and down as the knob turns. While moving the trigger pointer, the value of
the trigger level on the screen changes accordingly.
Note: Turning the Trigger Level knob can not only change the trigger level
value, but also set the shortcut key of the trigger level at the vertical
midpoint of the trigger signal amplitude.
2. Press Force key to generate a trigger signal forcibly, mainly used in the
“Normal” and “Single” trigger mode.
A General Knowledge Of AFG System
As shown in Figure 5-1, there is one key. The following exercises are to
guide you through the use of the AFG system.
Figure 5-2: AFG control area
1. Press ON/OFF key to enable/disable the AFG function. Open the key light
on, close the key light off.
Bekijk gratis de handleiding van Voltcraft DOV704, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Voltcraft |
| Model | DOV704 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7226 MB |
