Voltcraft DOV702 handleiding
Handleiding
Je bekijkt pagina 23 van 37
Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here..Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
21
A General Knowledge Of Horizontal System
As shown in Figure 5-3,there are two knobs.The following exercises to
guide you through the use of the horizontal system.
Figure 5-3:Horizontal control area
1、 Rotary Horizontal Position knob to adjust the horizontal position of the
signal in the waveform window.
The Horizontal Position knob is to control the triggered horizontal
position of the signal; when turning the knob, the waveform moves
horizontally with the knob. When pressing the Horizontal Position key,
the horizontal displacement can be zero.
2、 Rotary the Horizontal Scale knob to change the settings of the horizontal
time base and thus observe the resulting change of the status information,
then the corresponding Horizontal Time Base in the status bar changes
accordingly. Press the Horizontal Scale knob enter or exit waveform
zoom mode.
A General Knowledge Of Vertical System
As shown in Figure 5-4, there are seven keys and two knobs. The
following exercises are to guide you through the use of the vertical system.
Bekijk gratis de handleiding van Voltcraft DOV702, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Voltcraft |
| Model | DOV702 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7226 MB |
