Vollrath VCBA128 handleiding
Handleiding
Je bekijkt pagina 7 van 8
Frozen Beverage Granita Machines Operator’s Manual 7
ROUTINE MAINTENANCE
Every day
Inspect the machine and check for leaks of product from the gaskets. If
you notice leaks, see the Troubleshooting section of this manual.
Every month
Remove the dust from the condenser filter at the back of the machine.
Annually
Inspect the louvers for dust and debris. Use a soft cloth to remove
debris and dust.
TROUBLESHOOTING
CAUTION
Sharp Edges and Corners
Condenser fins are sharp.
Problem Might be Caused By Course of Action
Intermittent dull noise.
The auger may be seized because product
may have over-frozen.
Position the Cold Drink/Granita switch to I (Cold Drink Mode).
Allow product to thaw. Mix ingredients may need to be adjusted
to prevent over-freezing. See “Add Mix” on page 3.
It takes too long for product to be
ready to serve.
Airflow is blocked.
Machine does not have enough clearance or the environment is
not correct. See “Clearance and Environment Requirements” on
page 1.
Condenser filter may be dirty. Check that the filter located behind the rear panel is clean.
Product is leaking from the machine.
The machine may not be properly assem-
bled.
Verify the machine is assembled correctly. See “Assemble the
Machine” on page 6.
Gaskets may need to be lubricated. Lubricate the gaskets.
Gaskets may be worn or damaged. Replace the gaskets.
Condensation on the bowl(s).
Ambient temperature is too warm or
humidity is too high.
Cool the environment or relocate the machine.
Order the double-wall bowl option. Contact your local Vollrath
representative or consult Vollrath.com.
Bekijk gratis de handleiding van Vollrath VCBA128, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vollrath |
| Model | VCBA128 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2287 MB |
