Vollrath Standard Drip Free Flange handleiding

Niet gecategoriseerd

Vollrath

12 pagina's

PDF beschikbaar

Handleiding

Hot Well Drop-ins Operator’s Manual 3

CLEANING

To maintain the appearance and increase the service life, clean your

equipment daily.

NOTICE: Do not use caustic cleaning chemicals, steel wool or

commercial lime removal products to clean the equipment.

Thoroughly rinse equipment with water after cleaning.

1. Turn the heat control to the “0” setting or turn the power switch

(some models) to the OFF position.

2. Unplug the drop-in.

3. Use gloves, mitts or pot holders to protect hands when removing

hot food containers.

4. Rotate the drain valve(s) to the open position. Drain the water.

5. Use a damp cloth or sponge dipped in soapy water to clean the

inside of the well and the outside of the equipment.

6. Thoroughly rinse equipment with water after cleaning.

7. Rotate the valve to the closed position,

TROUBLESHOOTING

CAUTION

Burn Hazard

Hot surfaces and food can burn skin. Allow the hot surfaces to

cool before handling.

Problem Might be Caused By Course of Action

Unit does not get to correct

temperature or to a high

temperature

Low or incorrect voltage to unit.

Verify that voltage rating in unit matches the source voltage. If not

have qualified electrical personal install proper source voltage.

No water or incorrect water level. Add water to correct level.

Bekijk gratis de handleiding van Vollrath Standard Drip Free Flange, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.