Vollrath FC-HCF-02120 handleiding
Handleiding
Je bekijkt pagina 6 van 8
6
ITEMS & MODELS
Item/Model Description
FC-HCF-01120-AD 1-Well Auto Drain, 120V FC-HCF-03120 3-Well, 120V
FC-HCF-01120-AD-FF 1-Well Auto Drain, Flat Flange, 120V FC-HCF-03120-AD 3-Well Auto Drain, 120V
FC-HCF-01208-AD 1-Well Auto Drain, 120/208–240V FC-HCF-03120-AD-FF 3-Well Auto Drain, Flat Flange, 120V
FC-HCF-01208-AD-FF 1-Well Auto Drain, Flat Flange 120/208–240V FC-HCF-03120-FF 3-Well Flat Flange, 120V
FC-HCF-02120 2-Well, 120V FC-HCF-03208 3-Well, 120V/208–240V
FC-HCF-02120-AD 2-Well Auto Drain, 120V FC-HCF-03208-AD 3-Well Auto Drain, 120/208–240V
FC-HCF-02120-AD-FF 2-Well Auto Drain, Flat Flange 120V FC-HCF-03208-AD-FF 3-Well Auto Drain, Flat Flange 120/208–240V
FC-HCF-02120-FF 2-Well Flat Flange, 120V FC-HCF-03208-FF 3-Well Flat Flange 120/208–240V
FC-HCF-02208 2-Well, 120V/208–240V FC-HCF-04208 4-Well, 120V/208–240V
FC-HCF-02208-AD 2-Well, Auto Drain, 208–240V FC-HCF-04208-AD 4-Well Auto Drain, 120/208–240V
FC-HCF-02208-AD-FF 2-Well Auto Drain, Flat Flange 120/208–240V FC-HCF-04208-AD-FF 4-Well Auto Drain, Flat Flange 120/208–240V
FC-HCF-02208-FF 2-Well Flat Flange 120/208–240V FC-HCF-04208-FF 4-Well Flat Flange 120/208–240V
UNPACKING THE UNIT
1. Remove all packing material, tape, and protective plastic.
2. Clean any glue residue left over from the plastic or tape.
3. Place unit in desired location.
4. Plug unit into a properly grounded electrical supply matching the nameplate rating.
NOTICE: Using incorrect voltage can cause damage and will void the warranty.
LOCATION & CLEARANCE
• Refer to the included installation instructions and the specification s
heet which can be found on vollrathfoodservice.com.
• Do not move the unit by pushing or pulling on the breath guard (if it is present).
• Place and operate unit in a flat, level position.
BEFORE FIRST USE
1. Clean and dry unit per the Cleaning and Maintenance Section.
FEATURES AND CONTROLS
HOT
COLD
OFF
FROZEN
1
HOT
COLD
OFF
FROZEN
2
HOT
COLD
OFF
FROZEN
3
HOT
COLD
OFF
FROZEN
4
A
E
C
D
Lorem ipsum
B
A. Well Display—shows temperature setting for a specific well when in HOT Mode.
B. Mode Indicator Lights—flash when unit is turned on. One flashes while selecting
and becomes solid after 3 seconds to indicate selected Mode.
C. Mode Selectors—turn wells on or off individually and allow simple switching
between Hot, Cold, and Frozen modes. Numbers correspond to well
placement from left to right, facing the operator's side of the unit.
D. Temperature Control—sets temperature of a well in HOT mode by pressing the
knob, then turning it while the value is flashing.
E. Power Control—turns unit as a whole on or off when pushed. Well Displays will
illuminate to show the value from the last use.
Hot/Cold/Frozen Modular Drop-Ins
FC-HCF-03208-AD
Bekijk gratis de handleiding van Vollrath FC-HCF-02120, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vollrath |
| Model | FC-HCF-02120 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1078 MB |
