Handleiding
Je bekijkt pagina 3 van 12
Commercial Induction Range Operator’s Manual 3
CLEANING
To maintain the appearance and increase the service life, clean your
induction range daily.
NOTICE: The cooking surface remains hot even when this equipment
is turned off.
NOTICE: Do not use abrasive materials, scratching cleansers or
scouring pads to clean the equipment. These can damage
the finish.
1. Press and release .
2. Unplug the cord from the wall outlet.
3. Allow the equipment to cool.
4. Wipe the exterior with a clean damp cloth.
5. Thoroughly wipe off any mild soap or chemical cleaners.
NOTICE: Residue could corrode the surface of the unit.
TROUBLESHOOTING
WARNING
Electrical Shock Hazard
Do not spray water or cleaning products. Liquid could contact
the electrical components and cause a short circuit or an
electrical shock.
CAUTION
Burn Hazard
Allow equipment to cool before moving or cleaning.
Problem Might be Caused By Course of Action
The unit turned off after ten minute(s). There is not a pot or pan on the induction
range or the cookware is not induction-
ready. The induction range turned off. This is
normal.
Make sure the cookware is induction ready. See the Function
and Purpose section of this manual.
The digital display lights are flashing. The unit is not detecting a pan. Make sure there is a pot or pan on the range, Make sure the
cookware is induction ready. See the Function and Purpose
section of this manual.
The heating LED is flashing. If the LED flashes twice, pauses and then
repeats the pattern, the unit is in overheat
protection mode.
Remove cookware. Let the cooking surface cool.
If the LED flashes 9 times, pauses and then
repeats the pattern, the cookware is not
induction ready.
Use induction-ready cookware. See the Function and Purpose
section of this manual.
If the LED flashes 6 times, pauses and then
repeats the pattern, there is problem with the
coil core.
Contact Vollrath Technical Services.
The unit suddenly stopped working. The unit may be too close to an external heat
source or the air intake may be restricted.
Relocate the unit away from any external heat source. Clear
any obstructions to the air intake.
Bekijk gratis de handleiding van Vollrath 6951020, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vollrath |
| Model | 6951020 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1804 MB |
