Vocopro UHF-8900 handleiding
Handleiding
Je bekijkt pagina 9 van 24
9
Connecting Antennas
The Antennas receive the UHF wireless signals from the microphones.
1. Attach the antennas to the connectors on the front panel by twisting them clockwise until rmly attached.
2. To disconnect the antennas, twist counter-clockwise.
Note: Please be sure to attach the 900MHz antennas to the top 2 antenna posts and attach the 600MHz antennas
to the bottom 2 posts.
Attaching the Rack Brackets
The UHF-8900 comes with detachable rack brackets which allows the unit to be installed in a standard 19 inch rack.
1. Use the included screws to fasten the rack brackets to the sides of the UHF-8900 as shown in the illustration below.
Mounting the UHF-8900 in a Rack
The UHF-8900 will t in a standard 19” rack (not included).
1. Align the UHF-8900 with the desired space in rack and slowly slide in, rear panel rst.
Note: Depending on your rack case design, it may be necessary to allow for sufficient space for the antennas.
2. While aligned, use rack case screws (not included) in the order shown below to stabilize the UHF-8900 in its space,
using the “X” rotation (numbered below) will ensure even tension and ush alignment.
Note: Do not tighten screws firmly until all screws are in place.
Getting Connected
1
2
3
4
Bekijk gratis de handleiding van Vocopro UHF-8900, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vocopro |
| Model | UHF-8900 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2296 MB |
