Vocopro SilentSymphony-Talk-Transmitter handleiding

Niet gecategoriseerd

Vocopro

16 pagina's

PDF beschikbaar

Handleiding

Getting Connected

The Silent Symphony is easily wired into

any system, just follow these steps:

1. Attach the antenna to the transmitter

(Arrow #1)

2. Connect a cable from the Audio

Output on the music source to the

RCA Audio Input located on the Silent

Symphony transmitter. (Diagram pg 13)

3. Connect a microphone to the 1/8"

input on the transmitter to be mixed

with the audio signal. (Diagram pg 13)

4. Select the Transmission Power Level.

(Pg 11, Fig A, Item #4)

5. Select from one of the three available

frequencies to broadcast on with the

Channel Select switch. (Arrow #2)

6. Power your headset receiver(s) ON and

select the appropriate channel to listen

with the Tune button. (pg 14)

7. Adjust the headset receiver volume to

a comfortable listening level.

With this setup, any audio that is fed

into the transmitter will be broadcast

wirelessly to all headset receivers tuned

to the same channel and that are within

its operational range.

12 ׀ VOCOPRO

Note: The transmitter will

power o if no input signal

is detected after 5 minutes.

Bekijk gratis de handleiding van Vocopro SilentSymphony-Talk-Transmitter, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.