Vocopro SilentPA-SEMINAR10 handleiding
Handleiding
Je bekijkt pagina 18 van 20
8. +5V USB IN - This mini-USB connection is used to
recharge the batteries, if rechargeable batteries are
installed.
Note: DO NOT ATTEMPT TO RECHARGE ALKALINE
BATTERIES;BATTERIES MAY EXPLODE.
Note: This input will NOT interface with a computer or any
other device; it will only charge the batteries if plugged into
a computer.
9. Charge Indicator - This LED indicates the charge level
when recharging the batteries.
• If LED is green, batteries are charged.
• If LED is red, batteries are charging.
10. Battery Compartment - This is where the two (2) AA
batteries are installed.
• Either alkaline or rechargeable batteries can be used.
Only rechargeable batteries should be used with the +5V
USB IN.
11. Clip - This metal spring will hold the receiver in place
when attached.
CHARGEUSB IN+5V
RF
POWER
ON
OFF
ANT.
18
BRACKETS AND MOUNTING
The Silent P.A. is packaged with a bracket kit to allow
installation into standard 19” rack mounts.
Mounting with a single Stationary Transmitter (ST):
1. Remove the 4 phillips head screws; 2 on either side of
the ST.
2. Attach the large and small brackets on either sides of
the ST.
3. Secure the entire receiver into a 19” rack case with the
mounting brackets.
Note: When installed into a rack case, the antennas will
need an open back to the rack to ensure full range.
Remove
1
Bekijk gratis de handleiding van Vocopro SilentPA-SEMINAR10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vocopro |
| Model | SilentPA-SEMINAR10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2077 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Gebruikershandleiding | Ja |
| Type stroombron | USB |
| Meegeleverde kabels | AUX, Audio (3.5mm), USB |
